IG6504.1E-CNUser ManualENDishwasher
How to fill the rinse aiddispenser20301234-+MAxABC DCAUTION! Only use rinse aidspecifically designed fordishwashers.1. Turn the cup (C) counterclockwi
• The programme starts and theindicator of the washing phase is on.• On/off indicator and start indicatorare on.Opening the door while theappliance op
What to do if you want to stopusing multi-tabletsBefore you start to use separatelydetergent, salt and rinse aid do thefollowing procedure.1. Set the
CBA1.Turn the filter (B) counterclockwise andremove it.2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).4. Wash the filters.5
CAUTION! An incorrect positionof the filters can cause badwashing results and damage tothe appliance.Cleaning the spray armsDo not remove the spray ar
Problem and alarm code Possible cause and solutionThe appliance does not fill with water.• The end indicator flashes 1 time in-termittently.• The Star
The washing and drying results are not satisfactoryProblem Possible cause and solutionPoor washing results. • Refer to "Daily use", "Hi
Problem Possible cause and solutionThere are residues of detergentin the dispenser at the end ofthe programme.• The detergent tablet got stuck in the
Power consumption Off-mode (W) 0.501) Refer to the rating plate for other values.2) If the hot water comes from alternative source of energy, (e.g. so
CONTENTSSafety information 2Safety instructions 3Product description 5Control panel 6Programmes 7Settings 7Before first use 9Daily use 10Hints and tip
Küppersbusch Hausgeräte GmbHPostfach 10 01 32, D-45801 Gelsenkirchen, Küppersbuschstr. 16, D-45883 GelsenkirchenTelefon: (02 09) 4 01-0, Telefax: (02
• Do not change the specification of this appliance.• The operating water pressure (minimum and maximum)must be between 0.5 (0.05) / 8 (0.8) bar (MPa)
necessary to change the fuse in themains plug, use fuse: 13 amp ASTA (BS1362).Water connection• Do not cause damage to the waterhoses.• Before connect
PRODUCT DESCRIPTION437 9 8 105611 121Upper spray arm2Lower spray arm3Filters4Rating plate5Salt container6Air vent7Rinse aid dispenser8Deterg
CONTROL PANEL1 2 3451On/off indicator2Programme marker3Indicators4Start button5Programme knobIndicatorsIndicator DescriptionWashing phase. It comes on
PROGRAMMESProgramme Degree ofsoilType of loadProgrammephasesConsumption values1)Dura-tion(min)Energy(kWh)Water(l) 2)Normal soilCrockery andcutlery• Pr
How to set the programmeselection modeThe appliance is in programme selectionmode when the on/off indicator comes onand start indicator starts to flas
1. Make sure that the programme markeron the knob is aligned with the indicatoron/off .2. To enter the user mode, turn the knobcounterclockwise until
Comments to this Manuals