Küppersbusch IKE2360-1 User Manual download pdf (Page 28)

If the advice does not lead to

the desired result, call the

nearest brand-mark service.

Replacing the lamp

Disconnect the plug from the mains socket.

1. Remove the screw from the lamp cover.

2. Remove the lamp cover (refer to the

illustration).

3.

Replace the used lamp with a new lamp

of the same power and specifically

designed for household appliances (the

maximum power is shown on the lamp

cover).

4. Install the lamp cover.

5. Tighten the screw to the lamp cover.

6. Connect the plug to the mains socket.

7. Open the door.

Make sure that the light comes on.

Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3.

If necessary, replace the defective door

gaskets. Contact the After Sales

Service.

TECHNICAL INFORMATION

Technical data

Dimensions of the recess

Height mm 1225

Width mm 560

Depth mm 550

Rising time Hours 12

Voltage Volts 230 - 240

Frequency Hz 50

The technical information are situated in the

rating plate, on the external or internal side

of the appliance and in the energy label.

INSTALLATION

WARNING! Refer to Safety

chapters.

Positioning

This appliance can be installed in a dry, well

ventilated indoor where the ambient

temperature corresponds to the climate

28

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

Comments to this Manuals

No comments