Küppersbusch IKE458-44T User Manual download pdf (Page 33)

Installation

• During normal operation, the condenser and

compressor at the back of the appliance heat up

considerably. For safety reasons, minimum

ventilation must be as shown in the instructions.

Attention: keep ventilation openings clear of

obstruction.

• Care must be taken to ensure that the appliance

does not stand on the electrical supply cable.

Important: if the supply cord is damaged, it must

be replaced by a special cord or assembly availa-

ble from the manufacturer or its service agent.

• If the appliance is transported horizontally, it is

possible that the oil contained in the compressor

flows in the refrigerant circuit. It is advisable to

wait at least two hours before connecting the

appliance to allow the oil to flow back in the

compressor.

• There are working parts in this product which

heat up. Always ensure that there is adequate

ventilation as a failure to do this will result in

component failure and possible food loss. See

installation instructions.

• Parts which heat up should not be exposed.

Wherever possible the back of the product should

be against a wall.

Environment Protection

This appliance does not contain gasses which

could damage the ozone layer, in either its

refrigerant circuit or insulation materials.The

appliance shall not be discarded together with

the urban refuse and rubbish. Avoid damaging

the cooling unit, especially at the rear near the

heat exchanger. Information on your local

disposal sites may be obtained from municipal

authorities.The materials used on this appliance

marked by the symbol are recyclable.

Disposal of old Appliances

The symbol on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it shall be handed over to

the applicable collection point for the recycling of

electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent

potential negative consequences for the environment

and human health, which could otherwise be caused

by inappropriate waste handling of this product. For

more detailed information about recycling of this

product, please contact your local city office, your

household waste disposal service or the shop where

you purchased the product.

IMPORTANT SAFETY INFORMATION

Building the appliance in

• Fit the appliance into the recess.

• Rotate the bracket of 180° in order to obtain the

right position ( 2).

The position (1) is on the delivery.

• Fix it to a solid wall with the appropriate bracket.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 47 48

Comments to this Manuals

No comments

Küppersbusch IKE458-44T User Manual Page 33

Comments to this Manuals

Related products and manuals for Fridge-freezers Küppersbusch IKE458-44T